| Belt Width |
15mm |
| Housing Width |
20mm |
| Housing Height |
20mm |
| Centre Distance |
200 - 1000mm |
| Maximum Load / Speed |
30N: 2 - 40 m/min |
| Environmental Conditions |
clean and dry |
| Series |
Conveyor with centre drive |
| Conveyor Belts |
Flat belt |
| Extensions |
Sliding supports (e.g. lateral guides)
Knife edge
Setpoint device 24V voltage supply
Setpoint device
|
Further information:
- Centre distances in mm (available at short notice): 200, 300, 400, 500, 600, 700, 800, 900, 1,000
Custom centre distances on request
- Speed controller integrated and easy to set by means of +/- keys
- Supply voltage: 24 V DC
- Standard conveyor belt: White, FDA, antistatic (others available on request)
- Simple setting of belt routing by means of adjusting screw
- Conveying direction variable
Fast and flexible
With its external motor, our conveyor with centre drive is extremely powerful and runs quickly and smoothly. One special feature that sets this series apart is the flexibility of the drive unit, which can be moved across the entire length of the conveyor. This makes it possible for you to install several belts right next to one another which run independently of one another.
Your advantages
- Speeds of up to 40 m/min
- Supply voltage: 24 V DC
- Several conveyors can be arranged in parallel, with or without being separated, and individually controlled
- Drive can be moved across the entire length of the profile
- Conveyors can be integrated at any point in your existing automation system
- Flexible distance between tracks: For example, it is possible to integrate a completely independent conveyor in the system every 20 mm
- Suitable conveyors for complex selection processes within your control system, e.g. in the case of quality variants: Different belts installed right next to one another run independently of one another
- Integrated control electronics with potentiometer: The speed can be set directly from 2 to 20 m/min
